Installation; Starting The Machine - Saeco Odea Go Mode D'emploi

STARTING THE MACHINE

Make sure the power button is not pressed and that the machine is turned off. Check the machine
features on the label on the bottom of the appliance.
1
Lift the cover of the coffee bean
hopper.
4
Fill the tank with fresh drinking
water up to the MAX level.
Reinsert the tank.
7
Place a container beneath the
steam spout.
2
Fill the container with coffee
beans. Close the cover placing
it correctly on the hopper.
5
Insert the plug into the socket
located in the rear panel of the
machine and insert the other
end into a socket with suitable
current.
8
Turn the knob until the
position is reached.

INSTALLATION

3
Remove the water tank.
We recommend installing the
page 8).
6
Firmly push down the power
button to turn on the machine.
The machine performs a self-
test.
9
comes out of the spout.
7