Using The Control For Hdmi Function For "Bravia" Sync; System Power Off - Sony HT-NT3 Mode D'emploi

Using the Control for
HDMI Function for
"BRAVIA" Sync
This function is available on TVs with the
"BRAVIA" Sync function.
By connecting Sony products that are
compatible with the Control for HDMI
function via an HDMI cable, operation is
simplified with the features below.
You can enable the Control for HDMI
function by setting [Control for HDMI] to
[On] (page 26).
Note

To use the "BRAVIA" Sync function, be
sure to turn on the system and all
connected device after completed the
HDMI connection.

Depending on the settings of the
connected device, the Control for HDMI
function may not work correctly. Refer to
the operating instructions of the device.
Control for HDMI - Easy Setting
You can set the system's [Control for
HDMI] function automatically by
enabling the corresponding setting on
the TV.
"DONE" appears in the front panel
display when the Easy Setting is
completed.
Note
You can set [Control for HDMI] function
manually if the above setting is not
working. For details, see "[HDMI Settings]"
(page 26).

System Power Off

When you turn off the TV, the system
and the connected device will turn off
automatically.
32
US
Note

The system does not turn off
automatically while playing music on this
system.

The System Power Off function may work
with devices other than those
manufactured by Sony, but operation is
not guaranteed.
One-Touch Play
When you play content on a device
(Blu-ray Disc™ player, "PlayStation®4",
etc.) connected to the system with an
HDMI cable, the system and TV are
turned on automatically and the input of
the system is switched to the
appropriate HDMI input.
Note

The feature above may not operate with
certain devices.

If you set [Standby Through] to [Auto] or
[On] (page 26), then play back the
contents on a connected device when the
system is in standby mode, sound and
image can only be output from the TV
while the system remains in standby
mode.

The One-Touch Play function may work
with devices other than those
manufactured by Sony, but operation is
not guaranteed.
System Audio Control
If you turn on the system while you are
watching the TV, the TV sound will be
output from the speakers of the system
automatically.
The volume of the system will be
adjusted when you adjust the volume
using the TV's remote control.
If the TV sound was output from the
speakers of the system the last time you
watched the TV, the system will be
turned on automatically when you turn
on the TV again.