Using The Speaker System By; Interlocking With A Tv; Operating The Speaker System By Interlocking With A Tv (Control For Hdmi Function) - Sony HT-S40R Mode D'emploi

Using the Speaker System by

Interlocking with a TV

Operating the Speaker
System by Interlocking
with a TV (Control for
HDMI function)
Connecting a TV compatible with the
Control for HDMI function using an HDMI
cable enables you to interlock the
speaker system operation such as power
on/off or volume adjustment with a TV.
About the Control for HDMI
function
The Control for HDMI function is a
function that enables operation of
devices connected with an HDMI (High-
Definition Multimedia Interface) cable by
interlocking each other.
Although this function works for devices
compatible with the Control for HDMI
function, it may not work if connecting
devices other than those manufactured
by Sony.
Preparing to Operate by
Interlocking with a TV
Enable the Control for HDMI function
settings of the TV connected to the
speaker system with an HDMI cable.
The default setting of the Control for
HDMI function of the speaker system is
[ON] (page 32).
Tips
• When connecting a device such as a Blu-
ray Disc player to a TV with an HDMI cable,
enable its Control for HDMI function.
• To enable the Control for HDMI function of
a TV or Blu-ray Disc player, refer to their
operating instructions.
28
US
• If you enable the Control for HDMI
("BRAVIA" sync) function when using a TV
manufactured by Sony, the Control for
HDMI function of the speaker system is
also enabled automatically.
Performing Power Operation
or Volume Adjustment by a
TV Remote Control
When performing TV power operation or
volume adjustment by a TV remote
control, the speaker system power
operation or volume adjustment is
interlocked.
TV remote control
Power interlocking
When you turn on or off the TV, the
speaker system will turn on or off
automatically.
Note
If you turn off the speaker system before
turning off the TV, the speaker system may
not turn on automatically even though you
turn on the TV next time. In this case,
perform the following operation.
– Select the speaker system for the sound
output device in the TV menu.
– When using Sony TV, turn on the
speaker system while the TV is turned
on.