Mac allister MPTP1500B MAC Notice Originale page 37

MPTP1500B MAC
• As the user, you are required to ensure, in consultation with your elec-
tric power company if necessary, that the connection point at which you
wish to operate the product meets one of the two requirements, a) or b),
named above.
Fig.11
Single-phase motor, Fig. 11
• The voltage of the power supply must be 230 V / 50 Hz.
• Extension cables up to a length of 25 m must have a cross-section of
1.5 mm², and beyond 25 m at least 2.5 mm².
• The connection to the mains must be protected with a 16 A slow-acting
fuse.
Electrical connection
GB
37