Unpack - Mac allister MPTP1500B MAC Notice Originale

MPTP1500B MAC
• It is imperative that the following situations are avoided at all times:
Premature interruption of the cutting operation (planing cuts which do not
complete the entire length of the workpiece; planing of badly bowed wood
where there is inadequate contact on the infeed table).
Never cut recesses, tenons or moulds.
Unpack and positioning
1. Check the contents of any possible transport damage. In case of a damage,
inform immediately the forwarding agent. Check the contents for complete-
ness. Inform immediately the dealer in case of any missing parts.
2. The complete machine is shipped in one single carton box. Any additional
parts that have to be attached to the machine, must be identified before
starting the assembly.
3. Prepare the location of the machine. Make sure there is sufficient space
to allow safe and trouble-free working. The machine has been designed
to operate in enclosed rooms. It must be set up in a stable way on a level,
firm ground.
4. The machine can be fastened to a work bench (fixing material not included
in the supply extent.

Unpack

GB
19