SodaStream GAIA Mode D'emploi page 15

CREATE THE BUBBLES
COMPATIBLE WITH
THE FOLLOWING ONLY:
Check for compatibility
on the Bottle pack.
1. Fill the plastic carbonating bottle with cold
water up to the fill line.
WARNING! Do not carbonate anything other
than water. Other liquids can contaminate
and clog internal parts, potentially resulting
in excessive pressure, bottle failure during
carbonation and serious injury. Never
carbonate after flavoring has been added.
2. To insert the plastic carbonating bottle screw
the plastic carbonating bottle into the
Sparkling Water Maker. WARNING! Never use
a Sparkling Water Maker with a broken
carbonating tube. This can cause excessive
pressure, bottle failure and serious injury.
3. To carbonate, press the carbonating button
in short 1 second presses; 3 presses for
standard carbonation and 5 presses for
strong carbonation.
4. When the desired level of carbonation is
achieved, unscrew the plastic carbonating
bottle. As you start un-screwing the bottle
you will hear the pressure being released
from the plastic carbonating bottle.
1L 0.5 L
®
SodaStream plastic carbonating bottles
1
3
Psss
4
Note: You may see small pieces of ice
appear in the water during carbonation of
very cold water. Any ice created will simply
melt.
1L
2
x3 x5
15