Télécharger Imprimer la page

Philips SUP025PY Mode D'emploi page 28

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
ENGLISH
5
THE COFFEE GRINDER (FIG.10)
Caution! Only turn the grinding control
knob, found inside the coffee bean
container (Fig.10), when the coffee grinder
is working. Do not insert ground and/or
instant coffee in the coffee bean container.
Do not insert anything other than coffee
beans in the container. The coffee grinder
contains dangerous moving parts; keep
fingers and/or other objects away. Before
carrying out any operations in the coffee
bean container, switch OFF the ON/OFF
switch (7) and remove the plug from the
wall outlet. Do not insert coffee beans when
the coffee grinder is working.
The quality and the taste of your coffee depend,
in addition to the used blend, also on the
grinding coarseness.
The appliance comes with a grinding adjusting
knob (Fig.10). To use this feature, turn the
graduated knob when the coffee grinder is
working; the numbers displayed on the knob
indicate the grinding coarseness.
The manufacturer sets the knob to an average
grinding coarseness in the factory: if the ground
coffee is too fine, turn the knob toward the higher
values; if the ground coffee is too coarse, turn
the knob toward the lower values.
You will note the change only after pouring
three /four coffees.
Use coffee beans for espresso coffee makers.
Avoid using limit grinding positions (e.g. 1 and
16); if this is necessary, try using different coffee
blends.
Store the coffee in a cool and dry place, in an
airtight container.
You should change the grinding position if the
coffee does not outflow optimally, specifically:
Too fast = grinding too coarse > grind coffee
finer;
Too slow (drips and/or no flow) = grinding too
fine > grind coffee coarser.
6
ADJUSTING THE COFFEE
DOSE (FIG.11)
You may select the quantity of coffee (dose) that
you wish to grind. The manufacturer sets an
average dose in the factory.
To change the ground coffee dose, simply turn
the knob (Fig.11) found inside the coffee
container. Turn it anticlockwise to increase the
dose and clockwise to decrease the dose.
You must adjust the dose before pressing the
coffee dispenser button.
This system allows you to obtain an optimal cup
of coffee with all types of marketed coffee.
7
THE COFFEE DISPENSER
Note: If the appliance does not di-
spense coffee, check the water level
in the tank.
• Before making coffee, make sure that the
green temperature-ready LEDs (23) and
(24) are lit and emit a fixed light and that
the water tank and the coffee container are
full.
• Place 1 or 2 coffee cups under the coffee
dispenser spouts; you can adjust the
height of the dispenser by moving it up or
down manually (Fig.12) until it suits your
cups.
7.1 Making coffee with coffee beans
• To dispense the coffee, press the correct
coffee button (23) or (24). The selected
button starts flashing (see chap.15), while the
other switches off.
To make 1 coffee, position a single coffee
cup under the coffee dispenser spouts and
press the button (23) or (24) only once; to
make 2 coffees, position two coffee cups
under the spouts and press the button (23)
or (24) twice.
In this operating mode, the appliance
automatically grinds and doses the right
quantity of coffee; making two coffees
requires two grinding and dispensing cycles,
which are automatically managed by the
machine.
• Then, the dispensing cycle starts.
• After carrying out the prebrewing cycle, coffee
• 28 •

Publicité

loading