Setup; Step 1: Connect The Display To Your Computer - Sony SDM-S91 Mode D'emploi

Setup

Before using your monitor, check that the following items are
included in your carton:
• LCD display
• Power cord
• AC adapter
• HD15 (RGB) video signal cable
• Cord strap
• Windows Monitor Information/Windows Utility/Macintosh
Utility Disk
• Warranty card
• This instruction manual
Step 1: Connect the display to your
computer
Turn off the monitor and computer before connecting.
Notes
• Do not touch the pins of the video signal cable connector as this might
bend the pins.
• Check the alignment of the HD15 connector to prevent bending the pins
of the video signal cable connector.
x Connecting to an IBM PC/AT or compatible
computer
to VIDEO output
IBM PC/AT or
compatible computer
HD 15 (RGB) video
signal cable (supplied)
x Connecting to a Macintosh or compatible
computer
When connecting this monitor to a Macintosh computer, use the
Macintosh adapter (not supplied) if necessary. Connect the
Macintosh adapter to the computer before connecting the cable.
to video output
Macintosh or
compatible computer
HD15 (RGB) video
signal cable (supplied)
GB
(continued)
7