Publicité
Les langues disponibles
Les langues disponibles
Air adjustment
Injectors were conceived to avoid any air adjustments and that whatever the gas you
use.
c) Use of device :
Elements of command and display
Command/Display
Piezo
(n°2 on picture)
Set knob
(n°1 on picture)
Opening
(n° 3 on picture)
Never use the appliance without its juice collector tray (n°5 on picture)
Switching-on
Press the power control knob (n°1 on picture) for a few seconds.
Press on the piezo (n°2 on picture) to light the burner.
Keep the control knob (n°1 on picture) pressed for some more seconds.
The burner then remains lit and it is now possible to increase the power by turning
the power control knob (n°1 on picture).
Grease the plate before each cooking.
Temperature setting
Once the burner is lit; set the appliance to the desired power by turning the control
knob (n°1 on picture).
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the gas consumption.
Stopping the appliance
Set each control knob (n°1 on picture) to 0: the appliance is completely switched-
off.
Close the butane or propane cartridge
Let the device cool.
Clean the appliance. (See 6. Cleaning)
Function
Switches on the appliance (simultaneously with the set knob)
Switches on the appliance (knob pressed simultaneously with
piezo)
Controls power (low flame = low power, high flame = high
power)
Can replace the piezo and thus helps to switch on the appliance
using a large matchstick or a gas lighter (simultaneously with
the set knob kept pressed for a few seconds)
19
Publicité
