KERN PCB 100-3 Mode D'emploi page 78

Reset to
This function resets all balance settings to factory setting.
factory setting
 In weighing mode keep the PRINT key pressed until [Unit]
 Press the MODE button several times until „rSt" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
rSt
rSt
 Use the SET key to confirm selection. The balance returns to
34
appears.
yes Balance will be reset to factory setting.
The balance keeps its individual setting
no
weighing mode.
PCB-BA-e-1718