KERN PCB 100-3 Mode D'emploi page 62

8 Basic Operation
Start-up
O N
O F F
Switching Off
O N
O F F
Weighing
Taring
TA R E
18
 Press ON button.
The balance will carry out a self-test The balance is ready
for weighing when the weight display appears.
 Press OFF button, the display disappears
 Place goods to be weighed on balance
 Wait for standstill control, after the standstill control, the
weighing unit appears right hand in the display (e.g. g or
kg)
 Read weighing result.
If the goods are heavier than the weighing range, the display
will show "Error" (=Overload), and a whistle is sounded.
 Place an empty weighing container, the weight of the
weighing container will be displayed.
 Press the TARE button, the zero display disappears. The
tare weight is saved until it is deleted.
PCB-BA-e-1718