Publicité
Les langues disponibles
Les langues disponibles
Montagehinweise / Mounting information / Consigne de montage / Montagetip
loading permitted and the instructions for mounting! Following installation, the
instructions must be made available to the user.
In case of questions, more information, uncertainties or if damage occurs, contact
the NORMBAU support service +49 (0) 7843 704 0 or visit us at www.normbau.de.
Load
Max. loading permitted of listed products: 100kg
With max. length and max. loading permitted, the max. force per fastening is 3kN.
Maintenance
NORMBAU products are not maintenance-free! The products are to be tested
monthly by qualified specialists for proper function. In the event of defects (e.g.
insufficient braking force), the assembly instructions must be observed.
Maintenance and cleaning
Risk of injury
Improper cleaning can cause damage to the surface and lead to injuries.
Nylon products from NORMBAU have a smooth, high-gloss, easy-to-clean
surface. Dirty parts can be cleaned with a soft, damp cloth or sponge. If heavily
soiled, we recommend a commercially available detergent. Common disinfectants
can be used for wipe disinfection. Acidic cleaning agents, care agents,
disinfectants and decalcifying agents must always be used in accordance with the
instructions for use. An acid content of more than 10% can attack the surface and
negatively change the brilliance and color. Use all agents only diluted, leave to act
briefly and rinse off sufficiently with water. Abrasive, strongly acidic and alcoholic
cleaning and care products should be avoided with Nylon.
More information about
maintenance and cleaning
Disposal
Disposal of the product and packaging is subject to the relevant national
regulations and must be disposed of in the prescribed manner.
2024-03-01 / 8214 346 / G
|
9 von 24
NORMBAU
Publicité
