Publicité
Les langues disponibles
Les langues disponibles
Appliance-specific safety instructions
for jigsaws
■
Hold power tool by insulated gripping
surfaces
only, when performing an
operation where the cutting accessory
may contact hidden wiring or its own cord.
Hold or touch the metal housing
allowed. Cutting accessory contacting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the operator
an electric shock.
■
Keep your hands away from the sawing area.
Do not reach underneath the workpiece.
Contact with the saw blade may result in injury.
■
Keep your hands away from the stroke
rod and the chuck. Contact with these compo-
nents may result in a crushing injury.
■
Always switch on the power tool before applying
it to the workpiece. Otherwise, there is a risk of
a kickback.
■
When sawing, ensure that the baseplate
placed on the workpiece.
■
After completing your work, switch the power
tool off and do not pull the saw blade
the cut until the tool has stopped entirely. This
prevents kickbacks, and allows you to put the
tool down safely.
■
Only use undamaged saw blades that are
in perfect working order. Bent and blunt saw
blades can break or may cause a kickback.
■
Do not try and slow the saw blade down after
switching off by applying lateral pressure. The
saw blade can be damaged, break or cause a
kickback.
■
Immobilise the workpiece securely. Use clamps/a
vice to hold the workpiece firmly. This is safer
than simply holding it in your hand.
■
Always route the power cord away from the
appliance to the rear.
■
Never work on moistened materials or damp
surfaces.
■
Wear a dust mask.
■
Ensure there is sufficient ventilation.
PMST 100 A1
All manuals and user guides at all-guides.com
Original accessories/auxiliary
equipment
■
is not
Information on saw blades
The Parkside basic equipment includes saw blades
principally for use with wood.
▯
NOTE
►
is
out of
Operation
►
Fitting/changing the saw blade
♦
♦
■
♦
Use only the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.
2 wood sawblades
You can use any saw blade provided it has
a suitable mounting.
Saw blade type
suitable
WARNING!
Always remove the plug from the power
socket before working on the appliance.
Undo the locking screw
Insert the saw blade
blade holder
. The saw teeth facing forward.
ATTENTION!
The saw blade
must sit in the groove of
the guide roller
.
Retighten the locking screw
key
.
unsuitable
using the Hex key
.
into the slot of the saw
using the Hex
29
GB
Publicité
