Publicité
Les langues disponibles
Les langues disponibles
DANGER:
Never cut near power lines, electric cords, or other elec-
tric sources. If bar and chain jams on any electrical cord
or line, DO NOT TOUCH THE BAR OR CHAIN! THEY CAN
BECOME ELECTRICALLY LIVE AND VERY DANGER-
OUS. Continue to hold the chain saw by the insulated
rear handle or lay it down and away from you in a safe
manner. Disconnect the electrical service to the damaged
line or cord before attempting to free the bar and chain
from the line or cord. Contact with the bar, chain, other
conductive parts of the chain saw, or live electric cords or
lines will result in death by electrocution, electric shock,
or serious personal injury.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing and head
protection. Failure to do so could result in objects being
thrown into your eyes resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
WARNING:
Never fell a tree or cut a log or limb that has a diameter
greater that the length of the guide bar. Only properly
trained professionals should perform these cuts. Perform-
ing these types of cuts can cause an accident and result
in death or serious personal injury.
NOTICE:
Before each use, inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or an
authorized service center for assistance.
OPERATION
APPLICATIONS
You may use this product for the following purposes:
„ Basic limbing, felling, and woodcutting
TO INSTALL/REMOVE BATTERY PACK
See Figure 5.
WARNING:
Always remove battery pack from your tool when you are
assembling parts, making adjustments, cleaning, carry-
ing, transporting or when not in use. Removing battery
pack will prevent accidental starting that could cause
serious personal injury.
NOTE: To avoid serious personal injury, always remove the
battery pack and keep hands clear of the look-out button
when carrying or transporting the tool.
To install:
„ Place the battery pack in your chain saw. Align raised rib
on battery pack with groove in chain saw's battery port.
„ Make sure the latches on each side of the battery pack
snap in place and that battery pack is secured in chain
saw before beginning operation.
To remove:
Locate latches on side of battery pack and depress both
sides to release the battery pack from the chain saw.
NOTICE:
When placing battery pack in your chain saw, be sure
raised rib on battery pack aligns with groove in chain
saw's battery port and latches snap in place properly.
Improper assembly of battery pack can cause damage
to internal components.
For complete charging instructions, see the operator's manu-
als for your battery pack and charger.
CHAIN LUBRICATION SYSTEM
See Figure 6.
NOTICE:
Remove battery pack from unit. Fill oil tank with bar and
chain lubricant (not provided) before starting the chain
saw. Failure to lubricate the chain will cause damage to
the bar and chain.
„ Use bar and chain lubricant (not provided) that is formu-
lated to perform over a wide temperature range with no
dilution required.
NOTE: Do not use dirty, used or otherwise contaminated
oils. Damage may occur to the bar or chain.
„ Carefully pour the bar and chain oil into the tank.
10 - English
Publicité
