Publicité
Les langues disponibles
Les langues disponibles
PRODUCT SPECIFICATIONS
Motor .......................................................................................................................................................................18 Volt DC
Bar Length ....................................................................................................................................................................... 12 in.
Chain oil tank capacity .................................................................................................................................................. 6.8 oz.
NOTE: This saw was designed for occasional light duty use and has some limitations as to what it can cut.
KNOW YOUR CHAIN SAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
CHAIN TENSIONING SCREW
This feature allows user to adjust the tension of the chain.
GUIDE BAR
The factory-equipped guide bar has a small radius tip that
offers a somewhat lower kickback potential.
UNPACKING
This product has been shipped completely assembled.
„ Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
„ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
„ Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
„ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Chain Saw with Scabbard
Combination Wrench
Operator's Manual
FEATURES
LOCK-OUT BUTTON
A control feature designed to prevent the motor from being
accidently started.
LOW KICKBACK SAW CHAIN
The low kickback saw chain helps minimize the force of a
kickback reaction by preventing the cutters from digging in
too deeply at the kickback zone.
QUICK VIEW OIL INDICATOR
Semi-transparent oil reservoir that allows user to see when
to add oil.
SWITCH TRIGGER
Squeeze the switch trigger to operate the unit after lock-out
button has been pushed in. Release the switch trigger to
stop the unit.
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
9 - English
Publicité
