Husqvarna L 321AHX Manuel D'utilisation page 21

Transmission assembly overview
1. Mulch plug
2. Rear insert
3. Transmission pulley
4. Idler bracket
5. Transmission cover
6. Blade adapter
7. Idler pulley
8. Front belt keeper
9. Ring
10. Blade
11. Hard washer
12. Lock washer
13. Blade bolt
14. Belt cover
To remove the drive belt
1. Operate the product until the fuel tank is empty.
2. Remove the spark plug cap from the spark plug.
3. Put the product on its side with the muffler down.
CAUTION: If the product is put with the
air filter down, the engine can become
damaged.
1241 - 001 - 08.07.2019
2
6
7
1
14
10
12
4. Remove the drive cover.
3
5
4
3
8
9
11
13
15