Publicité
Les langues disponibles
Les langues disponibles
STORAGE
For easy storing the vacuum cleaner.
• Rewind the cord by pressing the cord rewinding foot pedal
• Push the slide button on the telescopic tube upwards and push the telescopic tube together to
make it shorter. Release the slide button and let the tube snap into place.
• Park the vacuum cleaner and slide the floor nozzle in the attachment at the back of the device
[25].
Problem
The suction has decreased.
It is hard to move the brush
over the surface.
The vacuum cleaner makes
more noise.
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU). Observe
the rules that apply in your country for the separated collection of electric and electronic products. Correct disposal
of the product prevents negative consequences for the environment and for public health. The packaging material
of this product can be recycled 100%, return packaging material separately.
FREQUENTLY ASKED QUESTIONS
Possible cause
The dust collector is full.
The filters are clogged.
The suction power is too high.
The button on the brush is set on the
wrong setting.
The tube or hose is clogged.
The motor filter or HEPA filter is clogged. Replace the motor filter.
The cyclone system is clogged.
RECYCLING
EN - 18
.
Solution
Empty the dust collector.
Replace the motor filter for a new one or clean
the HEPA filter according to the instructions.
Open the extra suction power control on the
handle.
Make sure the brushes are retracted on carpet.
Make sure the brushes are down on a hard floor.
Disconnect the tube and the hose and empty
them.
Clean or replace the HEPA filter.
Empty the dust collector and clean the cyclone
system according to the instructions.
25
Publicité
