Publicité
Les langues disponibles
Les langues disponibles
Attaching the Fan Blades (continued)
Attaching the decorative rod and fastening the blade
assemblies to the motor
WARNING: To reduce the risk of personal injury, do not bend the blade
arms while installing, balancing the blades, or cleaning the fan. Do not
insert foreign objects between rotating fan blades.
Step 1. Rotate the decorative rods onto the setscrew on the motor housing
and firmly tightened. (Fig. 13)
Step 2. Insert the decorative rods through the holes on the decorative rod
holder. (Fig. 13)
Step 3. Fasten the blade assemblies to the fan motor assembly. Tighten the
two blade arm screws with lock washers provided. (Fig. 14)
Step 4. Repeat this procedure for the remaining blade assemblies.
Setscrew
Figure 13
Decorative rods
Blade assembly
Blade arm screws
with lock washers
Figure 14
Decorative rods
Decorative rod
holders
8.
Publicité
