Powersmart PS76826 Manuel D'instructions page 16

TO INSTALL BATTERY PACK (See Figure 7)
• Lift and hold up the battery door.
• Place the battery pack on the mower. Align guided ribs on battery pack with grooves in the
product's battery port.
• Make sure the latch on bottom of the battery pack snaps in place and that battery pack is fully
seated and secure in the product before beginning operation.
• Insert the safety key.
• If the machine is not going to be used immediately, do not insert the safety key.
• Close the door.
Figure 7
TO REMOVE BATTERY PACK (See Figure 7)
• Release the mowing switch and drive switch to stop the product.
• Remove the safety key.
• Press and hold the battery latch button at the bottom of the battery pack.
Remove battery pack from the product.
16