Powersmart PS76826 Manuel D'instructions page 15

TO INSTALL SIDECHARGE CHUTE
• On the side of the mower, lift the side discharge cover.
• Slide two hooks of side discharge chute under hinge pin on the side discharge cover. Lower the
side discharge cover.
Figure 5
Caution: Do not remove side discharge cover at any time.
TO INSTALL REAR PLUG
• Tilt the plug and clamp the top three points into the top, then press the bottom.
Figure 6
TO REMOVE REAR PLUG
• Lift the bottom of the plug up and remove the rear plug.
Please note that only when you using as side discharge need install rear plug,
when using as rear bag do not need install rear plug.
15