Parts List - Cembre RHU520 Notice D'utilisation Et Entretien

3.2) Replacement of the automatic coupler
To replace the automatic coupler proceed as follows:
– Remove the old coupler.
– Carefully clean the thread to remove the old sealant.
– Apply Teflon tape to the thread.
– Fit the new automatic coupler and tighten to 30 Nm (22 lbf ft).
3.3) Storage
(Ref. to Fig. 1)
When not in use, the head and the die sets should be stored and transported in the specific steel
cases to prevent damage.
Steel case for storing the presshead: VAL 520, size 384x231x145 mm (15.1x9.1x5.7 in.) weight 3,2 kg
(7 lbs).
Steel case for storing the die sets: VALMAT 520, size 500x310x68 mm (19.7x12.2x2.7 in.) weight 5,1 kg
(11.2 lbs) can accomodate up to 10 die sets.

4. PARTS LIST

(Ref. to Fig. 4)
Code N° Item
6280120 01 FORK
6120140 02 CYLINDER
6620400 03 RAM
6560600 04 DIE LOCATING PIN
6020080 05 PIN
6170180 06 SPRING COVER
6040660 07 RING
6490040 08 HANDLE
6170080 09 CHAIN
6521880 10 SPRING
6360560 11 O-RING

6560742 12 LOCKING PIN
6340540 13 M 10x8 GRUB SCREW
6340140 14 M 8x8 GRUB SCREW
6340620 15 M 8 DOWEL WITH BALL
6900266 16 M 5x16 SCREW
Items marked () are those Cembre recommends replacing if the head is disassembled.
When ordering spare parts always specify
the following:
- code number of item
- name of item
- type of head
- Serial number of head
5. RETURN TO Cembre FOR OVERHAUL
In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the Test Certificate supplied by Cembre together with the tool or fill in and attach
the form available in the "ASSISTANCE" section of the Cembre website.
5
DESCRIPTION Qty Code N° Item
1
6340160 17
1 6340200 18
1 6900055 19
1
6340082 20
1 6240080 21
1 6900210 22
1 6640190 24
2
6040425 25
1 6232015 26
1 6520603 27
2
6230799 28
1 6650118 29
1 6040419 30

1 6060120 31
1 6800186 32
1 6525072 33
The guarantee is void if parts used are not Cembre
original spares.
ENGLISH
DESCRIPTION
M 8x10 GRUB SCREW
M 8x20 GRUB SCREW
M 4x8 SCREW
M 6x8 GRUB SCREW
M 6x12 SCREW
M 5x10 SCREW
ø 6 GROWER WASHER
RING
LABEL (TG. 0354)
SPRING
METAL LABEL (TG. 0296)
D. 2,5x3,5 RIVET
BACK-UP RING
Q14-MS COUPLER
PROTECTION CAP
NIPPLE 3/8"-1/4"
Qty
1
1
4
1
1
4
1
1
1
1
1
2
2
1
1
1