Deleting The Programmed Channel On A Somfy Rts - SOMFY Situo 1 RTS Manuel D'installation Et D'utilisation

DELETING YOUR REMOTE CONTROL
4.2 Deleting the programmed channel on a Somfy RTS radio shutter mo-
torisation
1. Identify the control to be retained, i.e. the remote control or control point which will continue to control this
shutter and which only controls this shutter.
2.
Partially open the shutter using the control to be retained.
3. Press the PROG button on the control to be retained until the shutter makes an up and down movement (or
emits an audible signal).
The programming function is activated for 2 minutes.
4.
Press the channel selection button as many times as necessary until the indicator lights show the channel to
be deleted.
5.
Use a fine-tipped object to make a short press on the PROG button on the back of the remote control to be
deleted. The shutter moves up and down (or emits 2 audible signals).
Original control
3
Back of control point
Remote control to be deleted
4
or
Back of remote control
5
EN - Installation and operating guide SOMFY RTS 1-channel – 5-channel remote controls
4
or
or
9