Installing The Remote Control Wall Mounting - SOMFY Situo 1 RTS Manuel D'installation Et D'utilisation

5

INSTALLING THE REMOTE CONTROL WALL MOUNTING

This product must not be installed at a height greater than 2 m.
Following the illustration:
1.
Remove the protective film from the adhesive on the back of the wall mounting.
2. Fasten the wall mounting to a flat, clean and dry surface and press to ensure optimum bonding.
3.
Place the Situo RTS remote control on its holder.
1
10 EN - Installation and operating guide SOMFY RTS 1-channel – 5-channel remote controls
2 3