Sony UP-880 Mode D'emploi page 23

REMOTE connector (5)
Connect the RM-91 remote commander for
controlling print operation from a distance.
The RM-91 remote commander is supplied
with UP-890MD only.
GAMMA selector (6)
Changes the print mode to that for high-
density printing paper. The selector is
effective when the PAPER TYPE selector is
set to II or IV.
PAPER TYPE selector (6)
Sets the type of paper.
DIP SW (switches) (7 — 9)
Sets the print modes and functions.
VIDEO IN (input) connector (BNC
type) (5)
Connect to the video output connector of the
video equipment.
(6]
VIDEO OUT (output) connector (BNC
type) (5)
Connect to the video input connector of the
video monitor. The output signal type
depends on the setting of the THRU/EE
selector.
AC IN (AC power input) connector (5)
Connect to a wall outlet using the supplied
AC power cord.
Equipotential terminal
Equipped only with the UP-890CE/890MD.
Others | 23
mn