Sony UP-880 Mode D'emploi page 15

Adjusting the Contrast and Brightness
You can adjust the contrast and brightness of the print-out.
1 Set the THRU/EE selector to EE.
You can check the adjusted picture on the video monitor.
2 Adjust the brightness with the BRIGHT control and the contrast with the
CONTR control while watching the picture on the video monitor.
Adjusting the contrast
CONTR
Weaker (@) Stronger
Adjusting the brightness
BRIGHT
Darker s Brighter
To directly input the video signal from the video equipment, which is
connected to the printer, to the video monitor
Set the THRU/EE selector to THRU. The video signal is directly input to the video
monitor without being processed by the printer's circuitry.
Operation | 15
i
nh