How To Use Your Riveting Tool - FAR EB 310 Mode D'emploi

HOW TO USE YOUR RIVETING TOOL (fig. f1-f2-f3)
For an ideal performance of the riveting tool, we recommend
that the operator, after the first symptoms of fatigue during the
fastening cycle, inserts the battery (D) into the battery charger
(E) (model LGPA-1230).
Insert the battery (D) into the bottom of the riveting tool (F) as
shown in the figure, making sure it snaps into place.
To remove the battery from the tool, press the buttons (D1)
and slide it out.
To use the tool, insert the rivet (G) into the nozzle (A) and
press the tensil strength button (C). To collect the truncated
stem after riveting, turn the tool head face up to allow to the
nail to reach the proper container (H) on the back of the tool.
Warning: be sure that the tool is equipped with the nail container
closing cap (I), avoid to collect an excessive quantity of nails
that could block the tool.
Empty regularly.
WARNING!
Keep truncated stems in a specific container.
Dispose of stems properly.
f1
D1
D
E
If the riveting tool is used continuously, let it cool completely
every other time the battery is changed.
12
GB
D1
F
D
Date 12-2009
G
A
I
EB 310 EB 310
f2
C
f3
I
H
I
Revision - 04