Main Components; Identifying The Tool; General Notes And Application; Technical Specifications - FAR EB 310 Mode D'emploi

EB 310 EB 310

MAIN COMPONENTS

A) ................................................................................ Nozzle
B) .........................................................................Nozzlehead
C) ................................................................................ Button
D) ............................................................................... Battery
2 3 5
4 5 m
B
A
8 2 m
m
D

IDENTIFYING THE TOOL

The EB 310 riveting tool has a label bearing the name of the
manufacturer and the tool model.
Always refer to the information on the riveting tool when
requesting technical service.

GENERAL NOTES AND APPLICATION

The tool is intended solely for use with rivets having a diameter
between 2.4 and 6 mm.
Those with a 6-mm diameter may be used only in aluminum.
WARNING!
The work area must always be kept neat
and well-lit.
In particular, flammable liquids or gases must
not be present.
Revision - 04
m m
m
GB
Serial number and
manufacturing year
Name and address of
C manufacturer
Name of manufacturer

TECHNICAL SPECIFICATIONS

• Supply voltage ............................................................. 12 V
• Weight .................................................................. 2.600 Kg
• Operating temperature ...........................................-5°/+50°
• Root weighted mean square of overall
acceleration frequency (Ac)
to which arms are subjected .......................... < 2.5 m/sec2
• A-weighted emission sound pressure level ............ 80 dBA
• Peak C-weighted instantaneous sound pressure <130 dBC
• A-weighted emission sound pressure ..................... 86 dBA

ELECTRICAL CONNECTION

The EB 310 riveting tool is powered by an APPA 12V / 2,0 Ah
rechargeable battery. The ideal recharging time for the battery
is 50 minutes.
Use only FAR battery charger model LGPA-1230 to recharge
this battery.
For miscellaneous information about LGPA-1230 battery
charger, see the instruction book let provided with the unit itself.
Before plugging the battery charger into the power socket, make
sure that the line voltage corresponds to the value indicated on
the battery charger label.
Make sure the main electrical system is properly sized to support
the rated charge (see technical specifications).
Make sure the electrical system complies with current
regulations.
The power cord has a plug that must be inserted into a
matching socket.
Date 12-2009
Model
11