Publicité
Les langues disponibles
Les langues disponibles
To activate the Child-proof lock:
• Press both buttons shown above at
the same time and hold for approx. 2
seconds until the »Child-proof lock«
17a indicator lamp starts glowing.
Spin speed selector
3
The appropriate maximum spin speed
is automatically set in each pro-
gramme.
The current value is indicated by the
lights 12a.
12a
12b
12c
You should reduce the speed for especially
delicate fabrics.
Display
The display 16 shows the time remaining
for the programme to complete. The time
for hours and minutes is displayed as
"hh:mm". For example, a time of 10 hours
is shown on the display as "10:00" and 1
minute as " : 1".
3
The length of a programm depends
on the type of program and the addi-
tional functions selected. The details in
the table "Technical data and con-
sumption figures" refer to programms
without additional functions.
G
21
16
To deactivate the Child-proof lock:
• Press the same two buttons at the
same time and hold for approx. 2 sec-
onds until the »Child-proof lock« 17a
indicator lamp goes off.
• By repeatedly pressing the »Spin« 21
button you can change the speed– or
completely disable the spin cycle.
• In the »No spin« 12c setting no spin-
ning takes place; water is only drained.
• In the »Rinse hold« 12b setting the
programme stops after the last rinse
cycle. The laundry remains in the wa-
ter (to protect against creasing). A
blinking display notifies you that the
rinse stop has been reached. For steps
after this, refer "Quick instructions for
daily use".
3
The higher the spin speed, the lower
the residual moisture.
If you wish to dry your laundry subse-
quently in a dryer, select the maxi-
mum possible speed – this saves ener-
gy when drying.
14
Publicité
