Publicité
Les langues disponibles
Les langues disponibles
Prior to Operation
Prior to Operation
Preparing for Operation
1. Contact an installation specialist for installation.
2. Plug in the power plug properly.
3. Use a dedicated circuit.
4. Do not use an extension cord.
5. Do not start/stop operation by plugging/unplugging the power cord.
6. If the cord/plug is damaged, replace it with only an authorized replacement part.
Usage
1. Being exposed to direct airflow for a long time may be hazardous to your health. Do not expose
occupants, pets, or plants to direct airflow for a long time.
2. Due to the possibility of oxygen deficiency, ventilate the room when using the appliance
together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purpose (e.g. preserving precision
devices, food, pets, plants, or art objects). Such use may damage your properties.
Cleaning and Maintenance
1. Do not use water to clean inside the air conditioner. Exposure to water can destroy the
insulation, leading to electric shock.
2. When cleaning the unit, first make sure that the power and breaker are turned off. The fan
rotates at a very high speed during operation. There is a possibility of injury if the unit's power is
triggered while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
Introduction
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the
air conditioner.
This symbol indicates special notes.
NOTICE
8 Floor Standing Air Conditioner
Publicité
