SKYLOTEC SECUPIN SPA-TYP-10-L Notice De Montage Et Guide D'utilisation page 15

1. SYMBOLS
The system's components have pictograms, which have the following meanings:
2. PRODUCT DESCRIPTION
Product SPA-TYPE-10-L is a single anchor point tested and certified according to DIN EN 795/A:1996.
The single anchor point SPA-TYPE-10-L for mounting on trapezoidal sheet metal with insulation is suitable for
securing max. 2 people.
The anchor point is only suitable for the fall protection of people and designed to deform and absorb a fall.
It is not suitable for being used with a rope or for the attachment of other components and/or loads applying
tensile forces and/or as a transport eyelet.
The materials are not resistant under extremely aggressive conditions such as e.g. constant, alternating
immersion into sea water or within proximity of sea water spray, chlorinated atmospheres in indoor pools, or
atmospheres extremely polluted with chemicals.
Therefore, the individual anchoring point is particularly suitable for safely working on high buildings.
The materials are not resistant under extremely aggressive conditions such as constant, alternating
immersion into sea water or near sea water spray, chlorinated atmospheres in indoor pools, or
atmospheres extremely polluted with chemicals.
If the assembly or operating instructions, as well as the approval of the individual anchoring point are not
adhered to, any liability of SKYLOTEC GmbH shall be excluded.
3. SAFETY INFORMATION
All installers and users must read these instructions before use. The Installation instructions must be strictly
observed as failure to do so may endanger lives. Stop the installation of the fall protection immediately if you
encounter problems. For more information, please contact the manufacturer.
Since this system is electrically conductive, it must be integrated properly into lightning protection /
equipotential bonding according to standard DIN VDE 0185, if a lightning protection system is available.
MAT-MA-0023-EN SECUPIN
Please read the operating instructions before use!
Also, please read the provided "General User Guide"
by Skylotec before use!
Number of persons simultaneously using the anchoring device (in this case
max. 3 persons). As shown in 5.1.
Danger! or check the equipment
Please ensure that the provided operating instructions are stored
in a dry place when equipping the single anchor point and accessible to all
users at all times.
Visually check the functionality of the system before and during use.
23/01/2015 Page 2 of 12