5.Button function and operation
"Start" button - Start the motor
"Stop" button — Stop the motor
"Program" button - Auto program selection
"Mode" button - Countdown mode selection
"Speed+/-" button — Adjust speed when running, adjust parameter value when setting
"Speed Shortcuts"- Directly select speed value when running
6.Sport modes
A.Manual mode
Enter manual mode: After the electronic power meter-wide display, enter the initial
standby mode, then press the start button, enter to manual mode.
B.Countdown mode
(1) Enter time countdown mode: In the initial standby mode press Kin selection time
countdown mode, where the time window 30:00 minutes and flashing speed by+/- keys
set the desired run time, set the range of 8: 00-9999:0000 minutes, press the start
button to enter the running time countdown mode.
(2) Enter distance countdown mode: In the initial standby mode, press the mode button
to select the mode from the countdown, this time from the window 1.0 kilometers and
flashes, the distance traveled by the speed +/- key set the desired setting range 1.0 to
99.0 kilometers, press Start key to enter the distance count down mode.
(3) Enter calories countdown mode: In the initial standby mode, press the mode button
to select the calorie countdown mode, then 50 calories window displays and flashing
speed by +/- keys to set the required run-calorie, setting range from 20 to 990, press
the Start button to enter calorie countdown mode.
C.Auto mode
Enter auto mode: In the initial setting mode or standby state, press the key to enter the
program automatic program selection. At this time window 30:00 minutes and flashes
through speed +/- keys set the desired run time, set the range of 8: 00 " 99: 00 min-
utes, press the Start button to enter the automatic
7.Sleep Function
When the treadmill stops running without any operating more than 10 minutes into
hibernation, spreadsheets automatically turn off the display, press any key to wake
electronic form, re-enter standby mode after the initial full-display.
8.Safety lock function
After normal use, the need to specify the location of the safety lock into electronic form
before they can operate electronic form; safety lock to win, spreadsheets or E07 LCD
window displays "---", and accompanied by a beep every second warning; as in the
running, won the safety lock, the system will quickly stop, close again the safety lock,
all motion data is cleared.
program.
7
EN