Before Calling Your After Sales Service - Zanussi ZNME32FW0 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
PART - 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at improper levels
or if a problem occurs with the appliance. Warning codes are displayed in the freezer and
cooler indicators.
ERROR TYPE
E01
E02
E03
E06
E07
E08
E09
MEANING
Sensor warning
Low Voltage
Warning
Freezer
compartment is not
cold enough
WHY
Power supply to the
device has dropped to
below 170 V.
Likely to occur after
long term power failure.
EN -21-
WHAT TO DO
Call Service for assistance as
soon as possible.
- This is not a device failure, this
error helps to prevent damages
to the compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs
to be contacted.
1. Set the freezer temperature
to a colder value or set Super
Freeze. This should remove
the error code once the
required temperature has been
reached. Keep doors closed
to improve time taken to reach
the correct temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment
until the correct temperature
has been reached and the
error is no longer.
If this warning continues an
authorised technician needs
to be contacted.

Publicité

Table des Matières
loading

Table des Matières