Télécharger Imprimer la page

Energetics POWER RUN 5.0 Mode D'emploi page 5

Masquer les pouces Voir aussi pour POWER RUN 5.0:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Safety Instructions
To protect the floor or carpet from damage, place a mat under the treadmill.
-
Turn off the power whilst the treadmill is not in use and remove the safety key.
-
In case of emergency please place both feet at the same time on the side reins.
-
To activate an emergency stop, please detach the safety key from the console.
-
Ensure that an area of 2000 x 1000 mm behind the treadmill is free from any obstacles.
-
This product is made for home use only and tested up to a maximum body weight of 120 kilograms.
-
We take no responsibility for personal injury or damage sustained by or through the use of this treadmill.
-
The noise creation of treadmill is under 70 db.
-
The unit requires a power supply of 220V – 230V / 50 HZ.
-
The function of the immobilization method: the purpose of immobilizing the treadmill is to prevent
-
unauthorized use. This can be accomplished by removing the Safety Key from the console, unclipping it
from the cord and putting it in a non-accessible place.
The emergency dismount: Follow the steps listed below if you experience pain, feel faint or need to stop
-
your treadmill in an emergency situation:
1.) Grip handrails for support.
2.) Step onto the lateral platform.
3.) Pull the Safety key off the console.
The function of the emergency stop: The Safety Key functions as the emergency stop. In an emergency
-
situation, remove the Safety Key from the console and the treadmill will come to a stop.
Noise compliance: This treadmill meets the requirements of the noise pollution standards.
-
Search for noisy parts: If you should notice unusual noises, like grinding, clacking etc. try to locate it and
-
have it repaired by a professional. Make sure the treadmill is not used until after repairs have been
made.
5

Publicité

loading