Belkin F5D5141uk5 Manuel D'utilisation page 6

Connecting Networking Devices to your Switch Connecting Networking Devices to your Switch
Connecting your Switch to your Computers
1.
Power down all your equipment.
2.
Connect a Category 5e or 6 Ethernet cable between each
computer's network interface card (NIC) and one of the
numbered ports on the front of the Switch.
3.
All switch ports can automatically negotiate speeds at full- and
half-duplex modes to allow users to attach 10Base-T,
100Base-Tx, and 1000Base-T network devices.
4.
Connect the power adapter cord into the power adapter socket
in the rear of the Switch; now plug the adapter into a power
source (wall jack or power strip).
4 4