Publicité
Les langues disponibles
Les langues disponibles
10 – Display and Confi guration
1
10-11 Local Setup Menu
•
Enter the UPS system setup menu as described in
1
2
Use the scroll buttons ( , ) to move the cursor to "LOCAL
SETUP", then press the enter button (
3
•
Use the scroll buttons (
2
4
one of the menu choices.
5
6
•
From the "DATE/TIME CHANGE" screen, use the scroll buttons
3
( , ) to select the desired settings and press the enter button
(
) to confirm the settings. Note: Changing this setting does not
require an administrator login – a user login is sufficient.
7
8
•
4
From the "PASSWORD CHANGE" screen, use the scroll buttons
( , ) and the enter button (
choice. Use the scroll buttons ( , ) to select the desired settings
and press the enter button (
9
The administrator password should be used by qualified service
personnel only.
10
11
12
•
From the "PARALLEL ID" screen, use the scroll buttons (
5
to select the desired settings and press the enter button (
to confirm the settings. Note: If two UPS systems are used in a
13
parallel redundancy configuration, the parallel ID numbers of the
UPS systems must be 1 and 2.
14
200706017 93-2688 SU manual 4C.indd 40
200706017 93-2688 SU manual 4C.indd 40
Section
10-7.
).
, ) and the enter button (
) to select
) to select the desired menu
) to confirm the settings. Note:
)
(continued)
1
2
3
4
4b
, )
5
40
11/29/2007 2:02:58 PM
11/29/2007 2:02:58 PM
Publicité
