Publicité
Les langues disponibles
Les langues disponibles
English
SPECIFICATIONS
Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NAIL SELECTION
● Be sure to use only the genuine metabo HPT nails for the NR90AD (S1) or the NR90AE (S1). The use of
any other nails can result in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Paper collated strip nails
Clipped-head nails
30°
10
NR90AD (S1)
70 – 120 psi (4.9 – 8.3 bar, 5 – 8.5 kgf/cm
18-3/16" × 12-11/16" × 4-15/16"
(462 mm × 322 mm × 125 mm)
7.0 lbs. (3.2 kg)
50 – 74 nails (2 strips)
WARNING
NR90AD (S1)
Min.
.266"
(6.8 mm)
.113"
(2.9 mm)
20-3/4" × 12-11/16" × 4-15/16"
(527 mm × 322 mm × 125 mm)
64 – 70 nails (2 strips)
.088 ft
/cycle at 100 psi
3
(2.5 ltr/cycle at 6.9 bar)
(2.5 ltr/cycle at 7 kgf/cm
)
2
3/8 NPT Thread
Max.
.303"
(7.7 mm)
.148"
(3.8 mm)
NR90AE (S1)
)
2
7.5 lbs. (3.4 kg)
Publicité
