LEGRAND KEOR HPE 200 kVA Manuel De Fonctionnement page 50

3.3.3 Environmental installation conditions
The air is classified by the EN 60721-3-3 standard (Classification of environmental parameters and
their severities – Stationary use at weather-protected locations) based on climatic and biological
conditions as well as on mechanically and chemically active substances.
Therefore the place of installation must meet specific requirements to ensure compliance with the
conditions for which the UPS was designed.
 Climatic conditions according to the technical specification of KEOR HPE 200-250-300 kVA
 Classification of biological conditions (EN 60721-3-3)
Environmental
parameter
a)
Flora
b)
Fauna
 Classification of mechanically active substances (EN 60721-3-3)
Environmental parameter
a)
3
Sand [mg/m ]
b)
Dust (suspension) [mg/m
c)
Dust (sedimentation) [mg/(m
Places where precautions have been taken to minimize the presence
of dust. Places away from dust sources
Places without any special precaution to minimize the presence of
sand or dust, however not in proximity to sand or dust sources
Places in proximity to sand or dust sources
Places in proximity to working processes that generate sand or dust,
or in geographic areas having a high proportion of sand brought by
the wind or of dust suspended in the air
26 OMP06262 REV. E
Installation and start-up of KEOR HPE UPS 200-250-300 kVA
Installation et démarrage de l'ASI KEOR HPE 200-250-300 kVA
Installazione e avviamento KEOR HPE UPS 200-250-300 kVA
Environmental parameter
Minimum operating temperature (°C)
Maximum operating temperature (°C)
Minimum relative humidity (%)
Maximum relative humidity (%)
Condensation
Rainfall with wind (rain, snow, hail, etc.)
Water with an origin other than rain
Ice formation
3B1
Presence of mildew, fungus,
NO
etc.
Presence of rodents and
other animals that are
NO
harmful to products,
excluding termites
3 ]
2 ∙h)
Class
3B2
Presence of mildew, fungus,
etc.
Presence of rodents and
other animals that are
harmful to products,
including termites
3S1
No
0,01
0,4
X
– 10
+ 40
5
95
NO
NO
NO
NO
3B3
Class
3S2 3S3 3S4
30 300 3000
0,2 0,4 4,0
1,5 15 40
X
X
X