LEGRAND KEOR HPE 200 kVA Manuel De Fonctionnement page 38

2.3 SPECIAL SAFETY WARNINGS
2.3.1 General warnings
The UPS is provided with various stickers with indications regarding specific dangers. These
stickers must be always well visible and replaced in case they are damaged.
The present documentation must be always available in proximity to the device. In case of loss we
recommend to request a copy to the manufacturer, whose details are available in the "Contacts"
section.
2.3.2 Personnel
Any operation on the UPS must be carried out by qualified personnel.
By qualified and trained person we mean someone skilled in assembling, installing, starting up and
checking the correct operation of the product, who is qualified to perform his/her job and has entirely
read and understood this manual, especially the part regarding safety. Such training and
qualification shall be considered as such, only when certified by the manufacturer.
2.3.3 Transport and handling
Avoid bending or deforming the components and altering the insulation distances while transporting
and handling the product.
Undistributed weight
The weight of the UPS is not uniformly distributed. Pay attention when lifting.
Please inspect the device before installing it. In case any damage is noticed from the conditions of
the package and/or from the outside appearance of the equipment, contact the shipping company or
your dealer immediately. The damage statement must be made within 6 days from receipt of the
product and must be notified to the shipping carrier directly. Should the product need to be returned
to the manufacturer, please use the original package.
Injury hazard due to mechanical damage
Mechanical damage to the electrical components constitutes a serious danger to
persons and property. In case of doubt regarding the non-integrity of the package or
of the product contained therein, contact the manufacturer before carrying out the
installation and/or the start-up.
14 OMP06262 REV. E
Installation and start-up of KEOR HPE UPS 200-250-300 kVA
Installation et démarrage de l'ASI KEOR HPE 200-250-300 kVA
Installazione e avviamento KEOR HPE UPS 200-250-300 kVA