GB
IE
Technical data
Carpet cleaner .........................PWS 20 A1
Mains voltage (U) 220-240 V~, 50/60 Hz
Power consumption of motor (P) ...1600 W
Suction power ..............0.16 bar (16 kPa)
Spray pressure (p) .........1.5 bar (150 kPa)
Fluid quantity (Q) ........................ 1 l/min
Protection class ................................
Protection type ................................. IPX4
Cable length.....................................5 m
Waste tank capacity (gross)............... 20 l
Water tank content (gross) ................... 3 l
Weight (incl. all
accessories) ....................approx. 8.02 kg
Sound pressure level
) ...................... 79 dB(A); K
(L
pA
Symbols and icons
Symbols used in the
instructions
Read the operating instruc-
tions carefully.
Hazard symbols with
information on preven-
tion of personal injury
and property damage.
Precaution symbol with in-
formation on prevention of
harm / damage.
Pull out the mains plug.
Connect the machine to the
power supply.
Notice symbol with informa-
tion on how to handle the
device properly.
18
Symbols on the appliance
II
Pictograms regarding the
use of nozzles and filters
= 3 dB
pA
Safety information
Electrical machines must not
be disposed of with house-
hold refuse.
Protection class
(Double insulation)
Nozzle to vacuum carpets.
Nozzle to vacuum smooth
surfaces and hard floor sur-
faces.
Nozzle to vacuum dust and
dirt from joints and cracks.
Specific nozzle to vacuum
cushions and mattresses.
Specific nozzle to clean the
car.
To absorb liquids.
Not suitable to absorb
liquids.
To absorb dry dirt from the
house, garage and work-
shop.
To absorb fine dust e.g. stone
dust or wood dust.
Caution! When using power
tools, observe the following
basic safety measures for the