Publicité
Les langues disponibles
Les langues disponibles
Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the
cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
3.3 How to use
3.3.1 Start cooking
After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that
the ceramic hob has entered the stat of standby mode.
Touch the ON/OFF
show "-"
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control (e.g. zone 3#)
Select a heat setting by touching the "-" or "+" control.
• If you don't choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time during
cooking.
• By holding down either of these buttons, the value will
adjust up or down.
control. all the indicators
7
Publicité
