CAMPAGNOLA Mastiff Manuel D'utilisation Et D'entretien page 50

6 - MAINTENANCE
WARNING!
• If the battery set (1) is not re-charged every 120 days, as duly indicated in par. 7.1.6, it will
irreparably get damaged.
6.1.7 Anvil replacement
The following operations shall be performed in the indicated order:
• Remove the cutting blade (14) (see par. 6.1.4)
• Remove the screw (33)
• Replace the anvil (16)
• Insert the pin (29) into the shear body and into the anvil (16) without tightening it
• Assemble the screw (33) without tightening it
• Tighten the pin (29)
• Tighten the screw (33)
• Remove the pin (29)
• Assemble the cutting blade (14) (see par. 6.1.4)
6.2 Special maintenance
WARNING!
Any special maintenance operation shall only be carried out by a CAMPAGNOLA S.r.l. Authorized Service
Point.
6.3 Periodic maintenance schedule
Maintenance
Cutting blade (14)
sharpening
Cutting blade (14)
replacement
Thorough overhaul by a
Campagnola Service Point
Blades (15) and pin (29)
lubrication
Battery set (1)
maintenance re-charge
7 - DISMANTLING AND DISPOSING OF THE COMPONENTS
7.1 General
At the end of its working life, the tool has to be dismantled.
The tool components shall be divided in order to dispose of them according to the materials they are made of
(batteries, metal, plastic, etc) and in compliance with the regulations of the country where the tool was used.
7.2 Dead batteries disposal
The dead and/or damaged batteries disposal and handling have to be carried out according to the Directive
91/157/CE or the corresponding regulations of the country where the batteries were used.
WARNING!
50 - 120
All manuals and user guides at all-guides.com
After the first Every Every 200.000 cuts (about
½ work hour day 100 hours)
X X
X
Every
400.000
cuts (100
hours more
or less )
X
X
At the end Every 120
of each days
work
season
X
X X