CAMPAGNOLA Mastiff Manuel D'utilisation Et D'entretien page 43

3 -SPECIFICATIONS
WARNING!
• Any other use has to be considered improper and potentially dangerous for the operators' safety. This
would make any warranty claims void.
• If it is not used for the purposes it was designed for, the shear may cause serious injuries to personnel
and bystanders and damages to equipment and things
3.5 Parts
Pos. Description
1 Battery set
2 Braces buckles
3 Belt buckles
4 Battery backpack
5
Electronic system connector
6 Cable loops
7 Battery charger plug
8 ON-OFF switch
9 Braces
10 Power supply cable
11 F
ront cover fixing screws
12 Trigger
13 ON–OFF led light
14 Cutting blade
15 Blade group
16 Anvil
17 Trigger guard
18 Electronic card box
19 Selector
20 Display
21
Electronic card power supply cable
22 Locking nut
23 Nut washer
24 Front cover fixing nuts
25 Blade bushing
26 Rack pin
27 Rack seeger ring
28 Pin spacer
29 Blade pin
30 Front cover
31 Rack pin cover
32 Cutting blade washer
33 Anvil fixing screw
34 Arm cable-fastener
35 Holster
3.6 Technical details
• Shear weight: ............................................................................ 1040 gr
• Weight of battery, electronic card box and backpack: ....................... 3,8 kg
• Blade opening: .......................................................................... 40 mm
• Battery: .................................................................................... Li-FePo4
• Battery endurance: .................................................................... >10 ore
• Automatic electronic battery charger model ................................. 0136.0125 (max. recharging time: 5 hours)
3.7 Safety devices
• Built-in safety device: When not working, after 1 minute the trigger has to be pressed 3 times to re-start the
shear; after 5 minutes the electronic card has to be switched off and then on by means of the selector (19) to re-
start the shear; after 20 minutes the battery automatically disconnects from the power supply, so it has to be
started again by means of the switch (8).
All manuals and user guides at all-guides.com
Function
Operates the shear
Fasten the braces to the shoulders
Fasten the backpack
Allows to carry the battery set
Connects the electronic card to the battery set
Allow to fasten the cables to the backpack
Connects the charger to the battery set
Operates the electronic card
Hold 10% of the backpack weight
Connects the shear to the electronic card box
Fasten the cover for the blades replacement
Operates the shear
Indicates if the shear is on or off
Mobile blade
Cutting parts
Fixed blade
Protects the trigger from accidental operating
Contains the electronic card for operating the shear
Allows to select the shear operating mode
Shows the necessary information to operate the shear
Connects the electronic card to the battery set
Locks the blades pin
Distributes the nut pressure
Lock the blade replacement cover
Drives the cutting blade
Connects the cutting blade to the rack
Holds the rack pin
Facilitates removing the rack seeger ring
Is the fulcrum of the cutting blade and the anvil
Allows to replace the blades
Allows to re-assemble the rack pin
Improves the friction between cutting blade and shear
Locks the anvil
Keeps the cable close to the operator's arms, so that he can move freely
Protects the shear during the transport
Pict. No
A
A
A
A
A
A
A
A
A-F
B
B
B
B
B-E
B
B-E
B
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
D
E
E
43 - 120