Publicité
Les langues disponibles
Les langues disponibles
Clean the filter as follows:
-
Loosen the knob (3), remove the cover (1) and the filter element (2).
-
Wash the filter element (2) with soap water. Do not use petrol or other solvents.
-
Leave the filter to dry in the open air.
-
Fit the filter element (2) and the cover (1) back on, tightening the knob (3) again.
3
WARNING:
The use of petrol or combustible solvents for cleaning can cause fire or explosion.
Therefore only use soap water or non-combustible solvent. Never operate the
machine without the air filter.
Spark plug
RECOMMENDED SPARK PLUG: L8RTC
To ensure proper engine operation, the spark plug must be properly gapped and free of
deposits.
1. Remove the spark plug cap.
2. Clean any dirt around the spark plug base.
3. Use the socket spanner which provided to remove the spark plug.
4. Visually inspect the spark plug. Remove carbon deposits using a wire brush.
5. Check for discoloration on the top of the spark plug. The standard color should be a tan
color.
6. Check the spark plug gap. The acceptable gap should be between 0.6-0.7.
7. Install /reinstall the spark plug carefully by hand.
8. Once the spark plug has been seated, tighten it with a socket spanner.
9. Reinstall the spark plug cap on top of the spark plug.
Cleaning
1. Keep your machine clean, the outside of the machine can be cleaned using a damp
soft cloth with a mild detergent if required, never use water to clean the machine as it
may cause damage to internal parts.
2. Some maintenance products and solvents may damage the plastic parts, these
include products containing benzene. Trichloroethylene, chloride and ammonia.
GB
1
23
Fig.21
2
Publicité
