Publicité
Les langues disponibles
Les langues disponibles
Starting the engine
WARNING!
The cutting attachement may start to move when the engine is started. Make sure the
attachment can not come into contact with any object.
Make sure that no unauthorised persons are in the working area, otherwise there is a risk
of serious personal injury.
1) Press the fuel pump several times until it fills with fuel. (fig.12)
2) Turn the engine switch to the "I "position.（Fig.13）
3) T o start a cold engine, move the choke lever to the
a warm engine, leave the choke lever in the run position. (fig.14)
Close the choke: Start position
Position: air filter cover
4) Slowly pull the recoil starter until you feel it engage and then pull it quickly. till it
starts.( (fig.15)
Fig.13
Fig.14
Fig.15
16
GB
Fig.12
position. In order to restart
Publicité
