Publicité
Les langues disponibles
Les langues disponibles
5) TRANSPORTATION AND HANDLING
a) Whenever the machine is to be handled or transported you must:
- turn off the engine, wait for the cutting device to stop and disconnect the spark plug
cap;
- fit the cutting device guard;
- use protective gloves when handling the blades.
- Keep the blade protection device on.
- only hold the machine using the handgrips and position the cutting device in the
opposite direction to that used during operation.
b) When using a vehicle to transport the machine, position it so that it can cause no
danger to persons and fasten it firmly in place to avoid it from tipping over, which may
cause damage or fuel spillage.
INTENDED USE
This unit is designed to be used in accordance with the descriptions and safety
instructions indicated in this operating manual
-
for private use
-
for trimming lawn edges and small inaccessible areas of grass (e.g. under bushes)
-
for cutting wild growth, shrubs and undergrowth.
It is not permitted to use this unit for any other purposes.
The user is liable for all injuries to third parties and damage to their property.
Operate the unit only in the technical condition as stipulated and delivered by the
manufacturer.
Arbitrary changes to the unit will exclude the manufacturer from any liability for resulting
injury and/or damage.
TECHNICAL SPECIFICATIONS
Model
Equipment mobility
Engine starting device
Drive shaft tube
Unit mass(empty tanks without cutting attachment) 8,0kg
Volumes of fuel tank
Engine model
Engine type
Engine displacement
Max altitude
Max working temperature
Max engine speed
Gear ratio
Cutting diameter
Cutting blade
Spool for grass trimmer line
Engine idling speed
Clutch engagement speed
Maximum engine performance
GB
BCI33UF
Hand-held
Manual recoil starter
Two tube
900cm³
SK1E36F -2E
Wind-cooling,2-stroke
32,6cm
3
1000m
40 ºC
9500 min
19:14
Brushcutter:255mm
Grasstrimmer:430mm
Φ255XΦ25.4X1.4 Max:
7000min
Ø2,4mm/4m
3000min
4200min
0.9 kW/7500min
7
-1
-1
± 300 min
-1
-1
-1
-1
Publicité
