Publicité
Les langues disponibles
Les langues disponibles
2). Preparation
a) WARNING-Petrol is highly flammable:
- store fuel in containers specifically designed for this purpose;
- refuel outdoors only and do not smoke while refueling;
- add fuel before starting the engine. Never remove the cap of fuel tank or add petrol
while the engine is running or when the engine is hot;
- if petrol is spilled, do not attempt to start the engine but move the machine away
from the area of spillage and avoid creating any source of ignition until petrol
vapors have dissipated;
- replace all fuel tank and container caps securely.
b) Replace faulty silencer.
c) Before using, always visually inspect to see that the tools are not worn or damaged.
Replace worn or damaged elements and bolts in sets to preserve balance.
d) Do not smoke near the machine.
e) Do not wear loose clothing, jewellery, or similar items that could be caught in the
starter or other moving parts.
f)
Never put any items into the ventilation openings. Non-observance may lead to injury,
or damage to the machine.
g) It is necessary reduction in power due to use in higher temperatures, altitudes and
humidity as below conditions.
-
Max Working Temperature: 40°C
-
Max altitudes: 1000 m
-
Max humidity: 95%
3). Operation
a) Do not operate the engine in a confined space where dangerous carbon monoxide
fumes can collect.
b) Keep the machine free of oil, dirt and other impurities.
c) Please always place the appliance on even and stable surfaces.
d) Never operate the appliance inside buildings or in an environment without proper
ventilation. Pay attention to air flow and temperature.
e) Do not operate or store the appliance in wet or humid surroundings.
f)
Ensure the sound absorber and air filter work properly. These parts serve as flame
protection in case of misfire.
g) To avoid possible burn injuries, do not touch the exhaust system or other parts that
become hot during operation. Pay attention to the warnings on the machine.
h) The engine must not be operated with excessive rotary speed.
the engine with excessive rotary speed raises the risk of injury. Parts which affect the
rotary speed must not be altered or replaced.
i)
Regularly check for leakage or traces of abrasion in the fuel system, such as porous
pipes, loose or missing clamps and damage to the tank or tank cap. Before use all
defects must be repaired.
j)
Work only in daylight or in good artificial light.
k) Never pick up or carry a machine while the engine is running
l)
Stop the engine:
-
whenever you leave the machine
-
before refueling
m) Before checking or adjusting the machine, the ignition plug and the ignition wire
respectively must be removed to prevent accidental starting.
n) Do not use of the machine when the operator is tired, ill or under the influence of
alcohol or the drugs.
o) Comply with local regulations to use the brush cutter.
p) Contact your local government offices for information regarding minimum age
requirements for operating the equipment.
GB
5
The operation of
Publicité
