Publicité
Les langues disponibles
Les langues disponibles
GB
Secure the additional guard (6) using the screw (7). (Fig.3-3)
Fig.3-3
WARNING!
Please check the blade and output shaft after each adjustment or assembly, it must be
correctly assembled and running smoothly.
Wear protective gloves when handling the guard.
Fitting the blade
Take the outer flange off after release the nut, then put the blade, outer flange, shield and
nut according to priority as below picture. Note the blade rotation direction needs be
same as below picture. Use screw driver to hold flange and tighten nut counter-clockwise,
ensure the nut is tightened enough.
.
.
Fig.4
Release blade (Fig.5)
Use screw driver to hold flange and release nut, the blade can be took off
11
Publicité
