Publicité
Les langues disponibles
Les langues disponibles
"GLACIER PRO" PLOW FRAME
KIT PN 2879103
6. With the winch, raise the pushframe until the
kickstand release lever engages and the kickstand is
lifted automatically. The blade should be about
halfway up when the release of the kickstand.
Kickstand Release Lever
You are now ready to use the system.
PUSHFRAME REMOVAL:
1. Lower the pushframe using the winch until the blade
touches the ground and the winch cable tension is
fully released. Remove the hook of the winch from the
winch link (winch link supplied in mount plate kit).
2. Lower the kickstand until the locking mechanism
engages. At that time, the kickstand shoe should not
touch the ground. If it touches the ground, the height
of the kickstand must be adjusted.
3. Pull the release handle (#45) and hold the handle
(#43) while leaving it down until it stops. At that
time the system is disengaged from the vehicle.
7515233
A-7515233 Rev. A
4. Retract the winch cable in position.
5. Slowly back the vehicle in a straight line up until it
is no longer in contact with the pushframe.
- 12-
Printed in China
Publicité
