Publicité
Les langues disponibles
Les langues disponibles
"GLACIER PRO" PLOW FRAME
KIT PN 2879103
HOOK UP ASSEMBLY:
1. Position the hook up (#43) and insert the
pins (#62) into the mounting holes of the pushframe
(#28).
2. Insert the
(2) 3 mm dia X 25 mm
the ends so they can not be removed.
N OTE: Make sure the hook up can move as shown
in the picture. If this is not the case, remove the clevis
pins (#62) and reposition the handle so that the
stoppers allow the part to move in the right angle.
7515233
A-7515233 Rev. A
hook up
(2)
cotter pins (#3) and fold
- 9-
Printed in China
Publicité
