Putting The Telephone Into Operation - switel DET217 Série Mode D'emploi

Putting the Telephone into Operation

2 Putting the Telephone into Operation
Safety information
Attention: It is essential to read the Safety Information in Chap-
ter 1 before starting up.
Checking the package contents
The package contains:
Contents
Base station (answering machine)
with power adapter plug
Charging station with power adap-
ter plug
Handset
Telephone connection cable
Batteries
Operating instructions
1
Visit www.switel.com to find out whether the telephone set is already
available.
74
56
DET Model
1 1
2171 2172 2173
1 1 1
− 1 2
1 2 3
1 1 1
2 4 6
1 1 1
Connecting the base station
Attention: Position the base station at least 1 m away from other
electronic devices, otherwise there is a risk of mutual distur-
bance.
Connect the base station as illustrated in the diagram. For reasons of
safety, only use the power adapter plug and telephone connection line
supplied.
1
2174
1
3
4
1
Attention: With regard to the base station with answering
8
machine, use the power adapter plug bearing the output data:
9 V, 500 mA.
1
Connecting the charging station
Connect the charging
station as illustrated
in the diagram. For
safety reasons, only
use the power
adapter plug sup-
plied.
Attention: With regard to the charging station, use the power
adapter plug bearing the output data: 6 V, 150 mA.
2
Only applies to telephone sets with at least two handsets;
. Checking the package contents" on Page 74.
Mains power outlet
Telephone line socket
2
Mains power
outlet